Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Brake Pads on a Nissan Rogue?

Model: Nissan Rogue S35 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Brake pads

See other generations:
Video tutorial

To replace the front brake pads on a Nissan Rogue, lift the vehicle so that the corresponding wheel is not in contact with the ground. This will allow you to unscrew the bolts securing the wheel and completely remove it. Once the wheel is off, loosen the bolts on the caliper, detach it from the rotor, and remove the pads inside.

After the old pads are removed, install the new ones and reassemble all previously removed components.


Updated on 13 May 2026 by ScegliAuto


Related tutorials

How to Replace the Front Brake Pads on the Nissan Rogue?
How to Replace the Front Brake Pads on the Nissan Rogue?
Nissan Rogue (2014-2020 / T32) To replace the brake pads on the Nissan Rogue, lift the vehicle so you can unscrew the bolts that secure the wheel to the hub. Once the wheel is remo…
Replace the Rear Brake Pads on the Nissan Rogue
Replace the Rear Brake Pads on the Nissan Rogue
Nissan Rogue (2014-2020 / T32) In today's tutorial video, you will learn how to remove and replace the rear brake pads on the Nissan Rogue. First, raise the vehicle and start by re…
How to Replace the Front Brake Pads on the Nissan Rogue T32
How to Replace the Front Brake Pads on the Nissan Rogue T32
Nissan Rogue (2014-2020 / T32) This guide shows how to replace the front brake pads on the Nissan Rogue T32. The first step is to remove the wheel on the side you are working on an…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos