Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the heating fan in the Nissan Micra?

Model: Nissan Micra K12 - Years 2002-2010
Part: Blower motor

This video guide aims to show the correct steps to disassemble the heating fan, referring to various Nissan cars and not just the Nissan Micra. Here is the process: Start by removing the glove compartment on the passenger side of the dashboard, behind which, on the left side, you can see the fan to be removed. Now, unscrew the pins that hold it in place, disconnect the electrical connector, and remove it from its housing. For safety, the procedure should be done with the instrument panel turned off.

Posted on 23 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the cabin fan of the Nissan Micra?
How do you replace the cabin fan of the Nissan Micra?
Nissan Micra (2002-2010 / K12) In order to replace the cabin fan of the Nissan Micra, you need to open the glove compartment located on the front passenger side: once it is open, y…
How do you remove the heating fan motor of the Nissan Micra k13?
How do you remove the heating fan motor of the Nissan Micra k13?
Nissan Micra (2010-2017 / K13) Given that it actually needs to be replaced or serviced, after performing the necessary checks, we see in this video tutorial how to proceed with the…
How to Replace the Cabin Fan Resistor on the Nissan Micra?
How to Replace the Cabin Fan Resistor on the Nissan Micra?
Nissan Micra (2002-2010 / K12) To replace the cabin fan resistor on the Nissan Micra, remove the panel located directly under the steering column. The panel should simply be unclip…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos