Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Belt on a Nissan Pathfinder

Model: Nissan Pathfinder MK 1, R50 - Years: 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: A/C controls

See other generations:
Video tutorial

Here’s how to replace the timing belt on a Nissan Pathfinder. Open the engine bonnet and lift it, securing it with the prop rod. Disconnect the power wiring using pliers, and remove the plastic soundproofing panel with a screwdriver.

Lift the car with a column lift to access the underside if necessary. Use a spanner to loosen the tensioner pulley and slide the belt off its seat.

Using a socket wrench, unscrew the securing bolt of the tensioner pulley, and remove the water pump. Fit the new water pump, the tensioner, and the belt, and tighten everything with the socket wrench.


Updated on 5 March 2026 by ScegliAuto


Related tutorials

How to Replace the Water Pump on a Nissan Pathfinder?
How to Replace the Water Pump on a Nissan Pathfinder?
Nissan Pathfinder (1996-2004 / MK 1, R50) To replace the water pump on a Nissan Pathfinder, access the left side of the engine block: the water pump is located on the left side of the unit. I…
Where is the fuse box located on a Nissan Pathfinder?
Where is the fuse box located on a Nissan Pathfinder?
Nissan Pathfinder (2005-2012 / MK 3, R51) In this mini guide, you will discover where to find the fuse box on your Nissan Pathfinder Mk3. Before proceeding, ensure the vehicle is parked on a …
How to Replace the Key Battery of the Nissan Pathfinder
How to Replace the Key Battery of the Nissan Pathfinder
Nissan Pathfinder (2005-2012 / MK 3, R51) The procedure to replace the battery in your Nissan Pathfinder Mk3 key is practically identical to that used in other Nissan car models produced duri…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos