Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the tire warning light on the Nissan X-Trail?

Model: Nissan X Trail MK 3, T32 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Tire pressure warning light

See other generations:
Video tutorial

In this tutorial, we will see how to reset the tire warning light on the Nissan X-Trail, an extremely simple and quick operation that should only be done once the correct pressure for each tire has been restored, following the instructions in the manual.

First, let's go inside the cabin, then insert the key and turn on the instrument panel.

Next, we access the settings menu using the directional controls located on the steering wheel, enter "Tyre Pressures," select "Calibrate," and confirm the choice. At this point, all that's left to do is restart the vehicle and check that the reset has been successful.


Posted on 12 December 2025 by ScegliAuto


Related tutorials

Nissan X Trail (2014-2023 / MK 3, T32) .. to reset the tyre pressure light on a Nissan X-Trail, a very simple and quick operation that should only be performed once the correct pressure of each.. …
Nissan X Trail (2014-2023 / MK 3, T32) .. low tyre pressure warning light on the Nissan X-Trail. This is a straightforward and quick operation to perform after restoring the correct pressure.. …
Nissan X Trail (2014-2023 / MK 3, T32) .. to reset the tyre pressure light on the Nissan X-Trail; before recalibrating the TPMS sensors, ensure all four tyres are at the correct pressure. So,.. …

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos