Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery in the Nissan X-Trail remote control

Model: Nissan X Trail MK 3, T32 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Key

See other generations:
Video tutorial

In this video, we see how to change the key of the Nissan X-trail remote control: by pressing the button on the side, we release the emergency key - which is attached to the key ring. Then, using a small screwdriver, we separate the two halves of the body.

In the half where the electronic circuit is not located, we find the button battery, which we simply remove by levering it out, again with our small screwdriver. It is a normal CR2032 battery, which we can easily find in any electronics store or supermarket.

We replace the battery, paying attention to the polarity, and then close the body and put the emergency key back in place.


Posted on 18 November 2025 by ScegliAuto


Related tutorials

How to replace the remote battery of the Nissan X-Trail?
How to replace the remote battery of the Nissan X-Trail?
Nissan X Trail (2001-2006 / MK 1, T30) If the remote battery of your Nissan X-Trail is flat, replacing it is very simple. You will need a small flathead screwdriver and a replacement batte…
How to Change the Key Fob Battery for the Nissan X-Trail
How to Change the Key Fob Battery for the Nissan X-Trail
Nissan X Trail (2001-2006 / MK 1, T30) Today, you will see the necessary instructions for disassembling and replacing the battery in the key fob for the Nissan X-Trail, following these sim…
How to Replace the Key Battery of the Nissan X Trail
How to Replace the Key Battery of the Nissan X Trail
Nissan X Trail (2007-2014 / MK 2, T31) To replace the battery of the Nissan X Trail key, lift the metal side key and insert a flat-head screwdriver into the hole to apply slight pressure, …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos