Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. X Trail
    4. : How to replace the remote control battery of Nissan X-Trail?

Nissan X Trail - Video tutorial

Model: Nissan X Trail MK 1, T30 - Years 2001-2006
Part: Key
Operation: How to replace the remote control battery of Nissan X-Trail?

In the event of a low battery in the remote control of the Nissan X-Trail, replacing it is very simple, let's see how to do it in the attached tutorial. To do this, we only need a small flat-tip screwdriver and the spare battery, model CR2025. We start by inserting the tip of the screwdriver into the slot at the bottom of the remote control, we pry and open the rear door. The battery is positioned in one of the two halves, let's remove it and insert the replacement obviously respecting the polarity, that is to say with the negative facing us. Finally, we reinsert the door.


Posted on 15 March 2024 by ScegliAuto

    Frequently Asked Questions

    • X Trail 2014-2023 - Why doesn't my Nissan X-Trail key work? Read Answer
    • X Trail 2014-2023 - Why did the key fault light come on in the Nissan X-Trail? Read Answer
    • X Trail 2014-2023 - Why does the Nissan X-Trail key not work? Read Answer
    • X Trail 2014-2023 - Why is the Nissan X-Trail key not recognized? Read Answer
    • X Trail 2014-2023 - Why does the Nissan X-Trail electronic key not work? Read Answer

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos