Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How is the service performed on the Nissan Pixo?

Model: Nissan Pixo MK 1 - Years 2009-2013
Part: Service warning light

It is well known that when the service light comes on in a car, it means that the maintenance check is due and that periodic maintenance needs to be performed. The operations involved are partially shown in the attached video; indeed, the engine oil, oil filter, air filter, and cabin filter are replaced. All the steps are shown one by one, and it should be emphasized that these are routine interventions that are well known to car owners. There are no difficulties in trying to do it yourself, if one wishes, as it is really nothing complex.

Posted on 20 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Door Panel of a Nissan Pixo?
How to Remove the Door Panel of a Nissan Pixo?
Nissan Pixo (2009-2013 / MK 1) To remove the door panel of a Nissan Pixo, first unscrew the bolt located next to the window switch panel. Once this is removed, you can detach the t…
How to reset the Service light on a Nissan Pixo?
How to reset the Service light on a Nissan Pixo?
Nissan Pixo (2009-2013 / MK 1) To reset the Service light on a Nissan Pixo, start by turning the ignition on by rotating the key in the ignition switch. Once the dashboard is lit, …
How to Replace the Air Filter on a Nissan Pixo
How to Replace the Air Filter on a Nissan Pixo
Nissan Pixo (2009-2013 / MK 1) Before you begin, open the bonnet of your Nissan Pixo. Start by removing the air filter cover by unfastening the clips, unscrewing the relevant screw…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos