Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Door Panel on a Nissan Pixo

Model: Nissan Pixo MK 1 - Years 2009-2013
Part: Door trim panel

To remove the door panel on a Nissan Pixo, follow these steps. Before starting the disassembly, disconnect the battery terminals located in the engine bay. Use a lever to remove the cover at the corner of the window. Unscrew the screws located in the handle and the door opening lever, then remove the plastic rivets. Unscrew the remaining screws on the door panel and detach the securing clips. Remove the panel from the door and disconnect the various power connectors. Reassemble everything in reverse order.

Updated on 11 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Door Panel of a Nissan Pixo?
How to Remove the Door Panel of a Nissan Pixo?
Nissan Pixo (2009-2013 / MK 1) To remove the door panel of a Nissan Pixo, first unscrew the bolt located next to the window switch panel. Once this is removed, you can detach the t…
How to Replace the Air Filter on a Nissan Pixo
How to Replace the Air Filter on a Nissan Pixo
Nissan Pixo (2009-2013 / MK 1) Before you begin, open the bonnet of your Nissan Pixo. Start by removing the air filter cover by unfastening the clips, unscrewing the relevant screw…
How to reset the Service light on a Nissan Pixo?
How to reset the Service light on a Nissan Pixo?
Nissan Pixo (2009-2013 / MK 1) To reset the Service light on a Nissan Pixo, start by turning the ignition on by rotating the key in the ignition switch. Once the dashboard is lit, …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos