Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the Service light on a Nissan Pixo?

Model: Nissan Pixo MK 1 - Years 2009-2013
Part: Service warning light

To reset the Service light on a Nissan Pixo, start by turning the ignition on by rotating the key in the ignition switch. Once the dashboard is lit, press and hold the clock button for about four seconds. This will cause the Service light to start flashing, allowing you to select the maintenance interval by pressing the same button again. After waiting another five seconds, you will notice that the Service light has been successfully reset, and you can then turn off the ignition.

Updated on 27 August 2026 by ScegliAuto

Video tutorial

Related tutorials
…
How to Replace the Air Filter on a Nissan Pixo
How to Replace the Air Filter on a Nissan Pixo
Nissan Pixo (2009-2013 / MK 1) Before you begin, open the bonnet of your Nissan Pixo. Start by removing the air filter cover by unfastening the clips, unscrewing the relevant screw…
Removing the Door Panel on a Nissan Pixo
Removing the Door Panel on a Nissan Pixo
Nissan Pixo (2009-2013 / MK 1) To remove the door panel on a Nissan Pixo, follow these steps. Before starting the disassembly, disconnect the battery terminals located in the engin…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos