Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Air Filter on a Nissan Pixo

Model: Nissan Pixo MK 1 - Years 2009-2013
Part: Air filter

Before you begin, open the bonnet of your Nissan Pixo. Start by removing the air filter cover by unfastening the clips, unscrewing the relevant screws, and disconnecting the hoses. This will give you access to the air filter that needs replacing, which you should extract from its housing, completing the disassembly. To fit the new air filter, simply follow these steps in reverse, and you will have successfully completed the replacement.

Updated on 8 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Nissan Pixo (2009-2013 / MK 1) Replacing the air filter on the Pixo? Open the front bonnet and carry out the disassembly. Pull up the engine bay release lever and lift the front bo…
Nissan Pixo (2009-2013 / MK 1) Below you will find instructions on how to manually replace the cabin air filter in your Nissan Pixo. The steps are simple and quick, as we will see …
Nissan Pixo (2009-2013 / MK 1) To remove the door panel of a Nissan Pixo, first unscrew the bolt located next to the window switch panel. Once this is removed, you can detach the t…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos