Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Engine Air Filter on Nissan Pixo

Model: Nissan Pixo MK 1 - Years 2009-2013
Part: Air filter

Replacing the air filter on the Pixo? Open the front bonnet and carry out the disassembly. Pull up the engine bay release lever and lift the front bonnet, securing it with the prop rod. Disconnect the clips that hold the cover in place. Open the air box (unscrew the securing screws), and remove the worn air filter. Insert a new filter into the designated housing (ensuring it fits snugly against the walls). Refit the air box cover and tighten the screws. Close the front bonnet after maintenance. Use an air filter identical to the one removed.

Updated on 29 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Air Filter on a Nissan Pixo
How to Replace the Air Filter on a Nissan Pixo
Nissan Pixo (2009-2013 / MK 1) Before you begin, open the bonnet of your Nissan Pixo. Start by removing the air filter cover by unfastening the clips, unscrewing the relevant screw…
Removing the Door Panel on a Nissan Pixo
Removing the Door Panel on a Nissan Pixo
Nissan Pixo (2009-2013 / MK 1) To remove the door panel on a Nissan Pixo, follow these steps. Before starting the disassembly, disconnect the battery terminals located in the engin…
How to reset the Service light on a Nissan Pixo?
How to reset the Service light on a Nissan Pixo?
Nissan Pixo (2009-2013 / MK 1) To reset the Service light on a Nissan Pixo, start by turning the ignition on by rotating the key in the ignition switch. Once the dashboard is lit, …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos