Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the cabin air filter of the Nissan X-Trail.

Model: Nissan X Trail MK 3, T32 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Cabin air filter

See other generations:
Video tutorial

In this video, we will see how to change the cabin air filter in a Nissan X-Trail: the filter is located in the front footwell on the right side, where the passenger sits in left-hand drive vehicles. In line with the center console, we will find a small white plastic cover; we need to remove it, and inside we will find the compartment that contains the non-woven filter: let's take it out, clean the compartment well from dust and debris, and then place the new clean filter back in, making sure to pay attention to the installation direction (the arrows should always point downwards).

We close the cover, and the operation is complete.


Posted on 2 January 2026 by ScegliAuto


Related tutorials

How to change the cabin filter on the Nissan X-Trail
How to change the cabin filter on the Nissan X-Trail
Nissan X Trail (2014-2023 / MK 3, T32) To change the cabin filter on the Nissan X-Trail, first remove the glove compartment by unscrewing the two plastic screws that secure it. Then unscre…
How to Replace the Cabin Filter on Nissan X-Trail
How to Replace the Cabin Filter on Nissan X-Trail
Nissan X Trail (2001-2006 / MK 1, T30) In this video tutorial, see how to replace the cabin filter on a Nissan X-Trail by following a few simple steps: first, purchase a new cabin filter f…
Replacement of the diesel filter of the Nissan X-Trail 1.6 dCi
Replacement of the diesel filter of the Nissan X-Trail 1.6 dCi
Nissan X Trail (2014-2023 / MK 3, T32) Following these simple steps, we will see how to disassemble and replace the diesel fuel filter of the Nissan X-Trail 1.6 dCi. First of all, we open …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos