Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the cabin filter on the Nissan X-Trail

Model: Nissan X Trail MK 3, T32 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Cabin air filter

See other generations:
Video tutorial

To change the cabin filter on the Nissan X-Trail, first remove the glove compartment by unscrewing the two plastic screws that secure it. Then unscrew the screws that hold it to the dashboard, removing the lower part first, followed by the glove compartment.

Disconnect the electrical connector attached to the back of the glove compartment.

Behind it, you will find the cover of the compartment where the cabin air filter is located. Remove the dirty filter and clean the compartment thoroughly to remove dust and debris.

Insert the clean filter, ensuring it is fitted in the correct orientation (the arrows should point downwards), then reassemble the glove compartment by replacing its screws, starting with the upper compartment and then closing the plastic clips.


Updated on 27 August 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Filter on Nissan X-Trail
How to Replace the Cabin Filter on Nissan X-Trail
Nissan X Trail (2001-2006 / MK 1, T30) .. how to replace the cabin filter on a Nissan X-Trail by following a few simple steps: first, purchase a new cabin filter from an authorised dealer;.. …
How to change the cabin air filter of the Nissan X-Trail.
How to change the cabin air filter of the Nissan X-Trail.
Nissan X Trail (2014-2023 / MK 3, T32) .. how to change the cabin air filter in a Nissan X-Trail: the filter is located in the front footwell on the right side, where the passenger sits in left-hand.. …
How to Replace the Cabin Air Filter on Nissan X-Trail 3
How to Replace the Cabin Air Filter on Nissan X-Trail 3
Nissan X Trail (2014-2023 / MK 3, T32) .. of the cabin air filter in your Nissan X-Trail third generation. First, park the vehicle on a flat surface and ensure it is completely turned.. …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos