Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key/Remote Battery of the Nissan Micra

Model: Nissan Micra K13 - Years 2010-2017
Part: Key

Replacing the key battery is very easy; you only need a small flat screwdriver and you're done, as demonstrated in the video above. First, extract the emergency key from the remote shell, then leverage the screwdriver in the joint between the two faces of the remote to fully open it. There’s not much more to do other than, with the same screwdriver, push on the battery to remove it from its seat. Once done, take the new battery and insert it, test its functionality, and close everything up.

Posted on 3 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery of the Nissan Micra key
How to replace the battery of the Nissan Micra key
Nissan Micra (2017-2024 / K14) Today we will explain how to replace the battery of a Nissan Micra vehicle remote control. To replace the battery, we need to press the side of the r…
Nissan Micra remote control battery replacement
Nissan Micra remote control battery replacement
Nissan Micra (2002-2010 / K12) Today we will see how to remove and replace the remote control battery of the key of a second series Nissan Micra. First of all we take our remote co…
How to replace the battery in the remote control key of a Nissan Micra
How to replace the battery in the remote control key of a Nissan Micra
Nissan Micra (2002-2010 / K12) Let's see how to open the remote control key of a Nissan Micra and how to replace the battery inside. We take our remote control and go with the help…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos