Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Service Reset on a Nissan Micra

Model: Nissan Micra K12 - Years 2002-2010
Part: Service warning light

In this useful video tutorial, we can see the entire operation to perform the service reset on a Nissan Micra, K12 model produced from 2002 to 2010. So let’s start the procedure by turning on the vehicle’s ignition without starting the engine. Next, on the screen showing the maintenance key icon, press and hold the right button on the speedometer until the mileage for the maintenance interval starts to flash as shown in the video. Now release the button and press it again to set a new maintenance interval, finally release the button and wait for the reset to complete with the following confirmation message.

Posted on 10 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Nissan Micra Maintenance Light Reset
Nissan Micra Maintenance Light Reset
Nissan Micra (2002-2010 / K12) How do you reset the maintenance light on a Nissan Micra? It’s a very simple operation, let’s see how. Turn on the ignition with the appropriate key …
Reset of the maintenance (service) light for the Nissan Micra.
Reset of the maintenance (service) light for the Nissan Micra.
Nissan Micra (2017-2024 / K14) These brief and simple steps will allow us to reset the maintenance (service) light on the Nissan Micra. First, we get inside the car and start turni…
Resetting the service light on the Nissan Micra.
Resetting the service light on the Nissan Micra.
Nissan Micra (2017-2024 / K14) Below we will see the instructions on how to reset the service light for the regular maintenance of the engine oil change of the Nissan Micra. First …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos