Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Cabin Fan Motor in Nissan Micra K13?

Model: Nissan Micra K13 - Years 2010-2017
Part: Blower motor

The cabin fan mentioned can be seen in the video to get an idea of its actual design. Its task is to introduce hot or cold air into the cabin, but if it fails to operate, after checking the fuse, you need to proceed with the removal. The motor is located in the centre of the dashboard, so to reach it, you must remove the entire upper cover of the dashboard, access the fan and motor, disconnect the electrical connector supplying it, and finally unscrew the fixing pins. After this, simply extract it from its housing.

Posted on 19 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you remove the heating fan motor of the Nissan Micra k13?
How do you remove the heating fan motor of the Nissan Micra k13?
Nissan Micra (2010-2017 / K13) Given that it actually needs to be replaced or serviced, after performing the necessary checks, we see in this video tutorial how to proceed with the…
Where is the OBD port of the Nissan Micra K13 located?
Where is the OBD port of the Nissan Micra K13 located?
Nissan Micra (2010-2017 / K13) If you want to locate the OBD port inside your Nissan Micra K13, all you have to do is follow the steps described in the following guide. First of al…
How to Replace the Pollen Filter on a Nissan Micra K13
How to Replace the Pollen Filter on a Nissan Micra K13
Nissan Micra (2010-2017 / K13) In this video, see how to replace the pollen filter on a Nissan Micra K13: access the filter from the passenger footwell, which is extremely simple. …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos