Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Timing Belt on a Nissan Qashqai

Model: Nissan Qashqai J10 - Years 2006-2014
Part: Timing belt

Raise the car on a column lift and remove the front wheel, using a screwdriver to detach the right wheel arch liner. Once these operations are complete: lift the bonnet, remove the engine soundproofing panel and the timing belt cover. Use a suitable spanner to loosen the tensioner pulley and slide the belt off its seat. After fitting the new belt, use the spanner to tension the tensioner pulley, adjusting until the correct tension is achieved on the belt (previously fitted). Finally, check the tensioner and the belt itself, tightening everything with a socket spanner.

Updated on 11 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Nissan Qashqai (2014-2022 / J11) Today's guide will illustrate the main steps to remove and replace the timing belt on the Nissan Qashqai 1.5 DCi. For this engine type, the timing be…
Nissan Qashqai (2006-2014 / J10) Before starting, lift your Nissan Qashqai. Begin by removing the front wheel and the inner wheel arch by unscrewing the relevant bolts and clips. Nex…
Nissan Qashqai (2006-2014 / J10) Today's procedure will show us how and when to remove the timing belt of the Nissan Qashqai 1.5 dCi; the manufacturer states that the timing belt on …

Other guides you may be interested in

    Frequently Asked Questions

    • Qashqai 2006-2014 - When to replace the timing belt on the Nissan Qashqai 1.5 dCi? Read answer
    • Qashqai 2014-2022 - Cost of changing the timing belt on the Nissan Qashqai 1 5dci? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos