Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Air Filter in the 2012 Nissan Qashqai

Model: Nissan Qashqai J10 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Cabin air filter

See other generations:
Video tutorial

To replace the cabin air filter in your 2012 Nissan Qashqai, you first need to know where it is located. As shown in the first part of the video, this filter is installed low in the cabin, near the driver's mat. Now that you have found it, although the position is a bit awkward, you can pull it out by hand and replace it with the new one. Before inserting the new filter, it is advisable to clean the housing with a small vacuum cleaner if you have one available.

When positioning the new filter, pay attention to the direction indicated by the arrows.


Posted on 20 July 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Air Filter on a Nissan Qashqai 2
How to Replace the Cabin Air Filter on a Nissan Qashqai 2
Nissan Qashqai (2014-2022 / J11) Periodically replacing the cabin air filter in your Nissan Qashqai Mk2 is very important as it ensures optimal air quality, especially when using the…
How to Replace the Cabin Air Filter on a Nissan Qashqai?
How to Replace the Cabin Air Filter on a Nissan Qashqai?
Nissan Qashqai (2006-2014 / J10) Before starting, enter the cabin of your Nissan Qashqai. Begin by unclipping and removing the cover located at the lower left of the centre tunnel ne…
How to Change the Cabin Air Filter on a 2023 Nissan Qashqai?
How to Change the Cabin Air Filter on a 2023 Nissan Qashqai?
Nissan Qashqai (2021-2026 / J12) The replacement of the cabin air filter on a 2023 Nissan Qashqai begins with the removal of the worn filter. But where is it located? As shown in the…

    Frequently Asked Questions

    • Qashqai 2014-2022 - What is the location of the pollen filter on the Nissan Qashqai? Read answer

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos