|
Do it yourself
| |||
| ||||
How to Maintain the Cooling System of the Nissan Qashqai J11
Model: Nissan Qashqai
J11
- Years:
2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Video tutorial
To renew the coolant in the Nissan Qashqai J11: open the bonnet, unscrew the cap of the expansion tank, block the rear wheels, and lift the car. Remove the lower engine cover (screws and rivets). Open the radiator drain tap and let the fluid drain out, then disconnect the lower hose. Reconnect everything, refit the cover, and lower the car. Disconnect the heating hose from the bulkhead, unscrew the two bleed screws (radiator and cylinder head). Slowly fill up to the maximum, letting air escape from the bleed screws. Continue until fluid flows from the heating hose without bubbles. Reconnect the hose and close the bonnet.
Posted on 1 October 2026 by ScegliAuto
Related tutorials
Nissan Qashqai
(2014-2022 /
J11)
If you own a Nissan Qashqai J11 and want to manually change the system language, carefully follow this guide and apply the steps described. First, en…
Nissan Qashqai
(2014-2022 /
J11)
In this brief and useful video guide, you will see how to reset the maintenance light on a Nissan Qashqai, model J11, produced from 2014 to 2022. Fir…
Nissan Qashqai
(2014-2022 /
J11)
This guide shows how to reset the service light on a Nissan Qashqai J11: turn on the ignition and use the arrow button to scroll until you find "Sett…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
Frequently Asked QuestionsWhat does the "Code 82" message indicate in the Chevrolet Orlando and how to remove it?
If the "Code 82" message appears on the dashboard of your Chevrolet Orlando, it means that the service interval in miles or time has been reached. Once all scheduled maintenance tasks are completed, you can remove the warning by following the simple procedure shown in this tutorial. First, insert the key and turn on the ignition, then press the "MENU" button located on the left control stalk and navigate to the screen displaying the "Reset" option. At this point, press the "SET/CLR" button at the end of the same stalk and confirm the reset. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.041
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |