Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Note
    4. : How to replace the taillight on a Nissan Note

Nissan Note - Video tutorial

Model: Nissan Note MK 1, E11 - Years 2004-2013
Part: Tail light
Operation: How to replace the taillight on a Nissan Note

We have a damaged taillight and we don't know how to remove it? Let's see the description. We open the tailgate of the luggage compartment, unscrew the tightening screws on the side of the headlight (right) with a screwdriver. We detach the rear light from its housing once all the screws have been removed (disconnect the power supply terminals) and replace the damaged bulbs with new ones (size and voltage equal). Finally we go to reassemble the lighthouse with attached screws and reconnect the power supply terminals. We check the operation of the lights with the control levers inside the vehicle.


Posted on 30 November 2023 by ScegliAuto



How to reset the service light on a 2011 Nissan Note
Nissan Note (2004-2013 / MK 1, E11) To carry out the manual reset of the service light of your 2011 Nissan Note, all you have to do is follow the steps described in our new guide. First
How to reset the TPMS light on the Nissan Note.
Nissan Note (2012-2022 / E12, MK 2) In the following mini guide dedicated to your Nissan Note Mk2, we will discover together how to reset the tire pressure monitoring system (TPMS) comp
What is the fuse diagram for the Nissan Note?
Nissan Note (2004-2013 / MK 1, E11) If a device in our Nissan Note suddenly stops working, we can first check the status of the respective fuses whose diagrams are indicated in this vid

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos