Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Navara
    4. : Removing the exterior mirror on Nissan Navara

Nissan Navara - Video tutorial

Model: Nissan Navara D40 - Years 2005-2015
Part: Outside rearview mirror
Operation: Removing the exterior mirror on Nissan Navara

Replacement of the damaged exterior mirror mounted on the mirror of a Nissan Navara, let's see the disassembly. With a plastic lever we go to leverage between the perimeter of the mirror cap and the mirror of the same. We pry until the mirror comes off the mirror (we disconnect the power cable). We remove the mirror ceiling light if we need to replace it or work inside it. We mount the new mirror inside the mirror; we are careful to hook the clamping clips into the mirror supports.


Posted on 2 December 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos