Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Door Panel on Nissan Qashqai

Model: Nissan Juke MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Door trim panel

See other generations:
Video tutorial

Remove the door panel on a Nissan Qashqai. Use a screwdriver to unscrew the screws located in the handle area.

Remove the trim at the corner of the window. Take off the switch panel above the door panel cover, unscrew the remaining screws on the door panel, and detach the securing clips.

Disconnect the wiring harness and the opening cable. Perform the desired maintenance inside the door.

Refit the door panel, reconnect the lever cable, and reattach the switch panel, securing it with screws.


Updated on 17 March 2026 by ScegliAuto


Related tutorials

Removing the Door Panel on a Nissan Juke
Removing the Door Panel on a Nissan Juke
Nissan Juke (2010-2019 / MK 1) Today, learn how to remove the door panel on a Nissan Juke. Remove the small screw cover located in the door pocket, as shown in the video, and unscr…
Removing the Door Panel on a Nissan Juke
Removing the Door Panel on a Nissan Juke
Nissan Juke (2010-2019 / MK 1) Is the door panel damaged? Here’s how to remove the door panel on a Nissan Juke. Unscrew the screws located in the handle area; disconnect the window…
How to replace the battery of the Nissan Juke remote control.
How to replace the battery of the Nissan Juke remote control.
Nissan Juke (2010-2019 / MK 1) To replace the battery in a remote control for a Nissan Juke, we need to slide the button located on the back of the remote and remove the top part c…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos