Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fitting Roof Bars on Nissan Qashqai

Model: Nissan Qashqai J10 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Roof rack bars

See other generations:
Video tutorial

In this video, learn how to fit roof bars on a Nissan Qashqai. The concept of fitting the bars is not straightforward, especially for a DIY operation: some decide to build their own bars and install them through welding, drilling, etc. This video will show self-made bars: to fit them, remove the seal covering the bar housing and take the necessary measurements to drill the chassis for installing the fixing screws, using some sealant to secure everything.

Then, fit the bars.


Updated on 18 March 2026 by ScegliAuto


Related tutorials

How to Install Roof Bars on the Qashqai
How to Install Roof Bars on the Qashqai
Nissan Qashqai (2006-2014 / J10) How do you install roof bars on the Qashqai? Let's look at the installation. Fit the roof bar kit (as shown in the video) with the bars adjusted to t…
How to Install Roof Bars on a Nissan Qashqai
How to Install Roof Bars on a Nissan Qashqai
Nissan Qashqai (2014-2022 / J11) Before you can start, exit the cabin of your Nissan Qashqai and open all the doors. Begin by assembling the roof bar kit, using the width of the roof…
Guide to Installing Roof Bars on the Nissan Qashqai
Guide to Installing Roof Bars on the Nissan Qashqai
Nissan Qashqai (2014-2022 / J11) In this guide, follow the instructions to install the roof bars or roof rack on the Nissan Qashqai. First, obtain the appropriate roof bars for your …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos