Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Micra
    4. : Air filter replacement on Nissan Micra

Nissan Micra - Video tutorial

Model: Nissan Micra K13 - Years 2010-2017
Part: Air filter
Operation: Air filter replacement on Nissan Micra

With the car off and the handbrake on, open the bonnet and put on the special support rod. Immediately next to the engine compartment is the air filter box: unhook the two visible metal clips and you can already open the container, without even disconnecting the air duct. Open just enough to extract the exhausted engine air filter and insert the new one, checking the correct direction of insertion (the filtering part goes outwards and not towards the engine). Refit the cover by inserting the two lower plastic hooks well and repositioning the metal clips.


Posted on 11 January 2024 by ScegliAuto



How to change air filter on Nissan Micra
Nissan Micra (1992-2002 / K11) Let's see the replacement of the air filter of a Nissan Micra. To replace the Micra's air filter we have to lift the front hood where it is positione
Nissan Micra Cabin Air Filter Replacement
Nissan Micra (2002-2010 / K12) In today's video tutorial we will see how to remove and replace the cabin filter of a Nissan Micra second series. First we go inside the car, on the
How to change the air filter of the Nissan Micra 2015
Nissan Micra (2010-2017 / K13) Do we want to replace the air filter of the Nissan Micra? To replace the Micra's air filter we have to lift the front hood where it is positioned. We

    Frequently Asked Questions

    • Micra 2002-2010 - Where is the cabin filter in a Nissan Micra K12? Read Answer
    • Micra 2002-2010 - How do you replace the air filter on the Nissan Micra K12? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos