Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Reverse Switch Replacement on Nissan Micra

Model: Nissan Micra K11 - Years: 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
Part: Reverse light switch

See other generations:
Video tutorial

Today, you will see the main steps to remove and replace the reverse switch on a first-generation Nissan Micra. First, lift the vehicle with a jack from the front left side and disconnect the cable found under the gearbox: then, using a 12 mm socket, remove the reverse switch by disconnecting its electrical connector.

Simply replace it with the new one; follow the video to fully understand the procedure for reinstalling the reverse switch!


Updated on 5 April 2026 by ScegliAuto


Related tutorials

How to replace the reverse sensor in the Nissan Micra?
How to replace the reverse sensor in the Nissan Micra?
Nissan Micra (2002-2010 / K12) As shown in this tutorial, replacing the reverse switch in the Nissan Micra is an extremely simple and quick operation. First, lift the front left si…
Where is the OBD port of the Nissan Micra K13 located?
Where is the OBD port of the Nissan Micra K13 located?
Nissan Micra (2010-2017 / K13) If you want to locate the OBD port inside your Nissan Micra K13, all you have to do is follow the steps described in the following guide. First of al…
How to Remove the Front Bumper of a Nissan Micra
How to Remove the Front Bumper of a Nissan Micra
Nissan Micra (1992-2002 / K11) Before you start, open the front bonnet of your Nissan Micra. Next, unscrew and remove the bolts securing the front lights to the frame. Then, discon…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos