Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove Fuses from Nissan Qashqai

Model: Nissan Qashqai J10 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Brake rotors

See other generations:
Video tutorial

How to remove the fuses from a Nissan Qashqai? Follow these steps for disassembly of the covering pieces and fuses. Open the door and enter the vehicle body, then use a plastic lever to remove the cover in the glove compartment located on the dashboard beside the steering wheel.

Use needle-nose pliers to pull out the damaged fuses from the compartment. After this operation, insert the new fuses into their designated slots in the compartment.

Close the fuse inspection box with the cover. Find the other fuses of the car inside the engine compartment next to the battery.


Updated on 6 April 2026 by ScegliAuto


Related tutorials

Where are the Fuses Located on the Nissan Qashqai?
Where are the Fuses Located on the Nissan Qashqai?
Nissan Qashqai (2014-2022 / J11) The fuse boxes present on the Nissan Qashqai serve to contain the fuses that regulate the operation of the devices. In this case, there will be one l…
Where are the Fuses Located on the Nissan Qashqai?
Where are the Fuses Located on the Nissan Qashqai?
Nissan Qashqai (2014-2022 / J11) On board the Nissan Qashqai, the fuse boxes contain the fuses that manage the operation of the devices present in the vehicle: in this type of vehicl…
Where are the Fuses on a Nissan Qashqai?
Where are the Fuses on a Nissan Qashqai?
Nissan Qashqai (2014-2022 / J11) The fuses on a Nissan Qashqai are located inside the dedicated fuse box in the car. This is situated on the side of the dashboard, accessible only by…

Other guides you may be interested in

How to Extract the Spare Wheel from a Mercedes Vito

The spare wheel of a Mercedes Vito is located underneath the vehicle, just below the rear boot. This video demonstrates how to extract the wheel from its compartment. First, open the boot and locate the tools provided with the vehicle to release the wheel; these can be found in a compartment on the right side of the boot. As shown in the video, use the supplied screwdriver to remove the cover cap from the hole where you will insert the socket spanner; this hole is located beneath the rubber seal above the rear bumper. Insert the spanner and attach the extension to allow you to turn it and lower the wheel from under the floor. Finally, detach the pin that allowed the wheel to lower and proceed to extract it from under the vehicle.

Watch the video!


by ScegliAuto

More videos