Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Brake Pads on a Nissan Qashqai

Model: Nissan Qashqai J11 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Brake pads

See other generations:
Video tutorial

Lift the bonnet and place the support rod in position. Loosen the wheel bolts of the affected wheel, then lift the car and fully unscrew them to remove the wheel.

Use a double spanner to unscrew the rear bolt of the brake caliper, disconnect the cable, and open the caliper. At this point, you can already remove the old pads, clean the braking area, and then proceed to insert the new pads.

Obviously, the new pads will be thicker than the ones removed, so expand the pistons where they will be inserted. Good luck!


Updated on 11 April 2026 by ScegliAuto


Related tutorials

Replacing Brake Pads and Disc on Nissan Qashqai
Replacing Brake Pads and Disc on Nissan Qashqai
Nissan Qashqai (2006-2014 / J10) Let's look at replacing the rear brake discs on a Nissan Qashqai along with the pads. After removing the rear wheel, undo the pins of the brake calip…
Removing Brake Pads on Qashqai
Removing Brake Pads on Qashqai
Nissan Qashqai (2006-2014 / J10) Replacing the disc brake pads on a Nissan Qashqai? Let's look at removing the front pads. Lift the car on a column lift (to the desired height), then…
How do you replace the front brake pads of the Nissan Qashqai?
How do you replace the front brake pads of the Nissan Qashqai?
Nissan Qashqai (2006-2014 / J10) It will be possible to replace the front brake pads of the Nissan Qashqai by lifting the car, so that the corresponding front wheel is not in contact…

    Frequently Asked Questions

    • Qashqai 2014-2022 - How much does it cost to replace brake pads on Nissan Qashqai? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos