Do it yourself
Frequently asked questions about cars and motorcycles

How to Turn Off the ESP Light on the Nissan Qashqai

Model: Nissan Qashqai J10 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Warning light – error code

See other generations:
Video tutorial

This guide shows how to turn off the ESP light on the Nissan Qashqai. When this light comes on, indicated by a car skidding, it means that one or more ABS sensors are not functioning.

The solution is to deactivate the ESP using the disable button located at the bottom left of the dashboard, and consult a mechanic to replace the damaged parts. The cost of the sensors ranges from £30 to £50 if done independently.

Repairs carried out by a mechanic will cost more due to labour. It may also be necessary to replace the sensor control cables.


Updated on 25 April 2026 by ScegliAuto


Related tutorials

Nissan Qashqai (2006-2014 / J10) In this guide, we will go through the steps to reset the traction control light (ESP) on a Nissan Qashqai. First, get inside the vehicle and connect …
Nissan Qashqai (2014-2022 / J11) Below are the instructions that will allow you to disable traction control on a Nissan Qashqai; it is advised not to disable traction control on the …
Nissan Qashqai (2014-2022 / J11) In this brief guide, you will find instructions to activate and deactivate the I-Key mode (as well as the keyless system) on a Nissan Qashqai. First,…

    Frequently Asked Questions

    • Qashqai 2014-2022 - What does it mean when the "chassis control system error" indication lights up on the Nissan Qashqai? Read answer
    • Qashqai 2014-2022 - What does the yellow brake warning light on the Nissan Qashqai mean? Read answer
    • Qashqai 2014-2022 - Why is the Nissan Qashqai handbrake warning light flashing? Read answer
    • Qashqai 2014-2022 - What does the red engine light on the Nissan Qashqai mean? Read answer

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos