Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Traction Control Light (ESP) on a Nissan Qashqai

Model: Nissan Qashqai J10 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Warning light – error code

See other generations:
Video tutorial

In this guide, we will go through the steps to reset the traction control light (ESP) on a Nissan Qashqai. First, get inside the vehicle and connect your diagnostic software to the OBD port of your car; then turn on the ignition, allowing the software to communicate with the ECU. Next, select the make, model, and engine type; then perform the error scan and reset the traction control light, following the instructions provided by the diagnostic tool!


Updated on 15 June 2026 by ScegliAuto


Related tutorials

Nissan Qashqai (2014-2022 / J11) Below are the instructions that will allow you to disable traction control on a Nissan Qashqai; it is advised not to disable traction control on the …
Nissan Qashqai (2006-2014 / J10) This guide shows how to turn off the ESP light on the Nissan Qashqai. When this light comes on, indicated by a car skidding, it means that one or mor…
Nissan Qashqai (2021-2026 / J12) To disable the traction control on the Nissan Qashqai, turn on the ignition by turning the key in the ignition switch: once the dashboard is lit, nav…

    Frequently Asked Questions

    • Qashqai 2014-2022 - What does it mean when the "chassis control system error" indication lights up on the Nissan Qashqai? Read answer
    • Qashqai 2014-2022 - What does the yellow brake warning light on the Nissan Qashqai mean? Read answer
    • Qashqai 2014-2022 - Why is the Nissan Qashqai handbrake warning light flashing? Read answer
    • Qashqai 2014-2022 - What does the red engine light on the Nissan Qashqai mean? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos