Do it yourself
Frequently asked questions about cars and motorcycles

How to Disable Traction Control on a Nissan Qashqai

Model: Nissan Qashqai J11 - Years 2014-2022
Part: Checks and maintenance

Below are the instructions that will allow you to disable traction control on a Nissan Qashqai; it is advised not to disable traction control on the road as it may compromise the vehicle's grip. Get into the cabin and start the instrument panel and the engine; find the traction control disable button at the bottom left of the steering wheel and press it to disable (the instrument panel will show a message indicating that traction control is disabled). Press the button again to enable traction control.

Posted on 2 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Nissan Qashqai (2021-2026 / J12) To disable the traction control on the Nissan Qashqai, turn on the ignition by turning the key in the ignition switch: once the dashboard is lit, nav…
Nissan Qashqai (2006-2014 / J10) In this guide, we will go through the steps to reset the traction control light (ESP) on a Nissan Qashqai. First, get inside the vehicle and connect …
Nissan Qashqai (2006-2014 / J10) Discover in this video the step-by-step instructions for removing and replacing the timing belt, and when to change it, on the Nissan Qashqai 1.5 DCI…

Other guides you may be interested in

    Frequently Asked Questions

    • Qashqai 2006-2014 - Where is the oil dipstick on the Nissan Qashqai? Read answer
    • Qashqai 2014-2022 - Why does the cruise control of the Nissan Qashqai not work? Read answer
    • Qashqai 2006-2014 - Why are the Nissan Qashqai steering wheel buttons not working? Read answer
    • Qashqai 2006-2014 - Where is the Nissan Qashqai indicator relay located? Read answer
    • Qashqai 2014-2022 - How do you disable Start and Stop in a Nissan Qashqai? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos