Do it yourself
Frequently asked questions about cars and motorcycles

How to Disable the Traction Control on the Nissan Qashqai?

Model: Nissan Qashqai J12 - Years: 2021, 2022, 2023, 2024, 2025, 2026
Part: Checks and maintenance

See other generations:
Video tutorial

To disable the traction control on the Nissan Qashqai, turn on the ignition by turning the key in the ignition switch: once the dashboard is lit, navigate through the menu using the buttons on the left side of the steering wheel. Select the "VDC Settings" option: now set the system to "Off", noting that the dashboard will display the indicator light showing that the system is disabled.

At this point, you can reactivate the system from the same menu and finally turn off the ignition.


Updated on 9 September 2026 by ScegliAuto


Related tutorials

Nissan Qashqai (2014-2022 / J11) Below are the instructions that will allow you to disable traction control on a Nissan Qashqai; it is advised not to disable traction control on the …
Nissan Qashqai (2006-2014 / J10) In this guide, we will go through the steps to reset the traction control light (ESP) on a Nissan Qashqai. First, get inside the vehicle and connect …
Nissan Qashqai (2014-2022 / J11) Today, we will explain how to activate the Cruise Control on a Nissan Qashqai model J. To activate the traction control and driving assistance system…

Other guides you may be interested in

    Frequently Asked Questions

    • Qashqai 2014-2022 - Have there been any issues reported with the 2015 Nissan Qashqai? Read answer
    • Qashqai 2006-2014 - Where is the Nissan Qashqai indicator relay located? Read answer
    • Qashqai 2014-2022 - How do you disable Start and Stop in a Nissan Qashqai? Read answer
    • Qashqai 2006-2014 - Why are the Nissan Qashqai steering wheel buttons not working? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos