Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Automatic Gear Shift Switch Replacement

Model: Nissan Micra K11 - Years: 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
Part: Transmission

See other generations:
Video tutorial

Once you have located the switch cable, proceed to remove the piece located on the gearbox at the bottom of the vehicle. Unscrew the screw that secures it and note the oil leaking from the gearbox.

Once the oil has finished leaking, detach the switch from its housing using a screwdriver. Replace the switch and reassemble the actuator, screwing in the securing screw while ensuring to reposition the small bracket that holds the cables in place and also acts as an anti-loosening washer.

Now, reintroduce the oil into the gearbox after locating the screw that serves as a cap on the top of the gearbox.


Updated on 9 February 2026 by ScegliAuto


Related tutorials

Reverse Switch Replacement on Nissan Micra
Reverse Switch Replacement on Nissan Micra
Nissan Micra (1992-2002 / K11) Today, you will see the main steps to remove and replace the reverse switch on a first-generation Nissan Micra. First, lift the vehicle with a jack f…
How to Change the Automatic Gearbox Oil in a Nissan Micra?
How to Change the Automatic Gearbox Oil in a Nissan Micra?
Nissan Micra (2017-2024 / K14) In this tutorial, see how to change the automatic gearbox oil in a Nissan Micra, a very simple operation. First, ensure the engine is completely cold…
When and How to Replace the Transmission Oil of the Nissan Micra
When and How to Replace the Transmission Oil of the Nissan Micra
Nissan Micra (2002-2010 / K12) This brief guide provides instructions for replacing the transmission oil of the Nissan Micra; generally, the gearbox oil should be replaced every 37…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos