Do it yourself
| ||||
|
Nissan Qashqai - Video tutorial
Model: Nissan Qashqai
J11
- Years 2014-2022 Before we can start, we will have to get out of the cockpit of our Nissan Qashqai. So let's start by lifting the front of the machine, using the special jack provided by the parent company. After that, we will have to go and unscrew and remove the bolts that secure the wheel to the front hub. By doing so, we will have freed the front wheel itself. We then proceed by going to disengage and remove the front wheel. When we have completed this step, we will have finished the disassembly. To mount the new front wheel, all we have to do is repeat these steps in reverse, and we will have finished the replacement.
Posted on 3 April 2024 by ScegliAuto
Other guides that may interest you |
Replace the steering angle sensor on the Volkswagen Golf 5When the steering angle sensor malfunction warning light comes on, it may need to be replaced as follows: first remove the steering wheel and the lower steering wheel guard by removing the three fixing screws. The steering sensor is located just below the steering column. To release it you need to have a small screwdriver and insert it into the hole on the front, push the screwdriver all the way down until the clips at the bottom are released. Next, pull down on the back of the card containing the sensor and disengage it from the steering column. At that point take the new card and reposition it, after which proceed backwards to reassemble the various components. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.019
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |