Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where to Find the Fuse Box in the Nissan CABStar

Model: Nissan Cabstar MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Fuse box

Video tutorial

In today's video, we will see where the fuse box is located in the Nissan CABStar. Enter the vehicle, specifically on the passenger side. Now open the glove compartment and remove it by applying pressure on it. You will find a small cover that conceals the main fuses.

To access the complete diagram, you need to remove the side plastic by pulling it towards you; you will also find the relays. Under the cover, there will be a sticker identifying the complete fuse diagram; the rest of the fuses and relays will also be listed under the second small box.


Updated on 6 May 2026 by ScegliAuto


Related tutorials

Location of the Fuse Box in the 2007 Nissan Cabstar
Location of the Fuse Box in the 2007 Nissan Cabstar
Nissan Cabstar (2007-2013 / MK 3) The 2007 Nissan Cabstar has a fuse box located inside the cabin, beneath the glove compartment on the passenger side. To access the fuse box in the g…
Nissan Cabstar Fuse Board
Nissan Cabstar Fuse Board
Nissan Cabstar (2007-2013 / MK 3) On this vehicle model, all fuses are found in two boxes. The first is located in the engine bay on the left side near the battery, and the second is …
How to Reset the Service Light on a Nissan NT400 Cabstar Van?
How to Reset the Service Light on a Nissan NT400 Cabstar Van?
Nissan Cabstar (2007-2013 / MK 3) In this tutorial, you will see how to reset the service light on the Nissan NT400 Cabstar van, an operation to be performed only after completing all…

Other guides you may be interested in

    Frequently Asked Questions

    • Cabstar 2007-2013 - Where are the fuse boxes located on Nissan Cabstar? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos