Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Nissan NT400 Cabstar Van?

Model: Nissan Cabstar MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Service warning light

Video tutorial

In this tutorial, you will see how to reset the service light on the Nissan NT400 Cabstar van, an operation to be performed only after completing all scheduled maintenance tasks. First, insert the key and turn on the ignition, then, using the right button located just below the display, scroll through the screens until you reach the one indicating "Maintenance". Once done, press and hold the same button to enter the submenu where you will select the service to reset.

At this point, you can start the reset by pressing and holding the button again, and when the screen starts to flash, complete it with the left button.


Updated on 28 July 2026 by ScegliAuto


Related tutorials

How to Reset the Oil Service on a Nissan Cabstar Van?
How to Reset the Oil Service on a Nissan Cabstar Van?
Nissan Cabstar (2007-2013 / MK 3) In this tutorial, you will see how to reset the oil service on a Nissan Cabstar van, an extremely simple and quick operation. Before doing this, ensu…
How to Reset the Service Light on a Nissan Cabstar?
How to Reset the Service Light on a Nissan Cabstar?
Nissan Cabstar (2007-2013 / MK 3) This guide shows how to reset the service light on the Nissan Cabstar commercial vehicle. This operation should only be performed after completing al…
How to Reset the "Service" Light on a Nissan CABStar
How to Reset the "Service" Light on a Nissan CABStar
Nissan Cabstar (2007-2013 / MK 3) Before you can start, sit in the driver's seat of your Nissan CABStar. Activate the instrument cluster by turning the key in the ignition. Then, pres…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos