Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Nissan Cabstar?

Model: Nissan Cabstar MK 3 - Years 2007-2013
Part: Warning light – error code

This guide shows how to reset the service light on the Nissan Cabstar commercial vehicle. This operation should only be performed after completing all required maintenance tasks. First, turn on the ignition. Then, using the button located under the fuel gauge, scroll through the various screens until you reach the maintenance screen. Press and hold the button while scrolling through the available services. Once you reach the service to reset, hold down the button on the left and select the desired interval by turning the right knob. Finally, press and hold the same button to confirm.

Updated on 14 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the "Service" Light on a Nissan CABStar
How to Reset the "Service" Light on a Nissan CABStar
Nissan Cabstar (2007-2013 / MK 3) Before you can start, sit in the driver's seat of your Nissan CABStar. Activate the instrument cluster by turning the key in the ignition. Then, pres…
How do you perform a reset on the Nissan Cabstar?
How do you perform a reset on the Nissan Cabstar?
Nissan Cabstar (2007-2013 / MK 3) In the Nissan Cabstar, just like in the Nissan Pathfinder, as mentioned in the video guide available here, there are common resets, for example, here…
How to Reset the Oil Service on a Nissan Cabstar Van?
How to Reset the Oil Service on a Nissan Cabstar Van?
Nissan Cabstar (2007-2013 / MK 3) In this tutorial, you will see how to reset the oil service on a Nissan Cabstar van, an extremely simple and quick operation. Before doing this, ensu…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos