Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Oil Service on a Nissan Cabstar Van?

Model: Nissan Cabstar MK 3 - Years 2007-2013
Part: Service warning light

In this tutorial, you will see how to reset the oil service on a Nissan Cabstar van, an extremely simple and quick operation. Before doing this, ensure you have completed all scheduled maintenance tasks. Start by inserting the key and turning on the ignition. Then, quickly press and hold the button located to the left of the speedometer. When the mileage interval begins to flash, adjust it with quick presses of the same button. Once you have set the interval as needed, for example, 12,000 miles, wait a few seconds to save the setting.

Updated on 12 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Nissan Cabstar (2007-2013 / MK 3) In this tutorial, you will see how to reset the service light on the Nissan NT400 Cabstar van, an operation to be performed only after completing all…
Nissan Cabstar (2007-2013 / MK 3) This guide shows how to reset the service light on the Nissan Cabstar commercial vehicle. This operation should only be performed after completing al…
Nissan Cabstar (2007-2013 / MK 3) In today's video tutorial, we will see the main steps to carry out routine maintenance by replacing the engine oil and oil filter on the Nissan CABSt…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos