Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Nissan
  4. :
  5. Rogue
  6. : How to replace Nissan Rogue front fog light bulbs

Nissan Rogue - Video tutorial

Model: Nissan Rogue T32 - Years 2014-2020
Part: Fog lights
Operation: How to replace Nissan Rogue front fog light bulbs

Let's see in this guide how to remove and replace the front fog light bulbs of the Nissan Rogue, following these simple steps. First of all, let's move to the front and start by removing the plastic bulkhead that we find under our front fog lamp, unhooking it from the internal clips; after which we disconnect the electrical connector of the bulb to remove it from the light. At this point we replace the lamp with the new one, of the right type (in this case a new LED light is mounted); we just have to reassemble everything!


Posted on 10 April 2024 by ScegliAuto



Replacing the rear light bulbs of the Nissan Rogue 1
Nissan Rogue (2008-2015 / S35) Let's see in this short guide how to remove and replace the rear light bulbs of the Nissan Rogue first series, in simple steps. First of all we open
How to replace the rear light bulbs in the Nissan Rogue?
Nissan Rogue (2014-2020 / T32) In this tutorial we can see how to remove the rear light and replace the bulbs in the Nissan Rogue. For this simple and quick operation we will need
How to replace the rear light bulb on the Nissan Rogue?
Nissan Rogue (2008-2015 / S35) In order to replace the rear light bulb of the Nissan Rogue you have to go to open the trunk lid, so that the bolts next to the headlight can be unsc

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos