Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Frontier
    4. : How to replace spark plugs on Nissan Frontier 4.0L V6

Nissan Frontier - Video tutorial

Model: Nissan Frontier D40 - Years 1997-2021
Part: Spark plugs
Operation: How to replace spark plugs on Nissan Frontier 4.0L V6

In today's video tutorial we will see how to remove and replace the spark plugs of the Nissan Frontier, with 4.0L V6 engine. First we open the bonnet of our car and start removing the intake hose connected to the air filter box; after which we remove the sleeves that we find on the upper part, disconnecting the mass air flow sensor, as shown in the video. At this point we are going to disconnect the spark plug connectors, using a socket wrench with extension to unscrew and remove them; let's replace them with the new ones, having the same pitch and the same thermal gradation!


Posted on 11 May 2024 by ScegliAuto



Where are the fuses located in the Nissan Frontier 2022?
Nissan Frontier (2021-2024 / D41) The box containing all the various fuses for your Nissan Frontier Mk2 (year 2022) is located inside the engine compartment, and thanks to the followi
How to take out the spare tire in the Nissan Frontier
Nissan Frontier (2021-2024 / D41) In today's video you will discover how to remove the spare tire from its seat in the Nissan Frontier. The wheel, in fact, is located under the rear b
How do i replace the front brake pads of the Nissan Frontier?
Nissan Frontier (2021-2024 / D41) The replacement of the front brake pads of the Nissan Frontier is carried out by lifting the car with a jack, so that the wheel corresponding to the

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos