Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Interior Dome Light on a Nissan Tiida Versa

Model: Nissan Tiida Versa C12 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018

See other generations:
Video tutorial

If an interior bulb in your Nissan Tiida is not working, changing it is not really difficult. The dome light is pressure-fit, so just remove it by prying on the tabs located on the outer sides of the dome light itself.

Disconnect the connectors and replace the damaged bulb. Now you can reconnect the connectors and gently press the dome light back into its housing.

Ensure that the dome light is securely in place to avoid it falling onto the floor mats or your head during sudden stops. When fitting it back into its housing, tap it until you are sure it is securely fastened.


Updated on 23 May 2026 by ScegliAuto


Related tutorials

How to Remove the Car Radio in the Nissan Tiida Versa
How to Remove the Car Radio in the Nissan Tiida Versa
Nissan Tiida Versa (2004-2011 / C11) In today's video, you will see how to remove the car radio in the Nissan Tiida Versa. First, gather a flathead screwdriver and a Phillips screwdriver…
How to Remove the Radio from the Nissan Tiida Versa
How to Remove the Radio from the Nissan Tiida Versa
Nissan Tiida Versa (2004-2011 / C11) Today, you will learn how to remove the factory radio from the Nissan Tiida Versa by following the instructions below. First, get inside the vehicle …
How to Replace the Rear Headlight Bulb on the Nissan Tiida Versa
How to Replace the Rear Headlight Bulb on the Nissan Tiida Versa
Nissan Tiida Versa (2004-2011 / C11) Today, we will see in this brief and simple guide how to remove and replace the bulbs in the rear headlight of the Nissan Tiida Versa, following the …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos