Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install a LED Kit in a Nissan Rogue

Model: Nissan Rogue T32 - Years 2014-2020
Part: Headlight

In this video, we will show how to replace the front bulbs with a LED kit in a Nissan Rogue, the American version of the Nissan X-Trail. Start by opening the hood and securing it with the prop rod. Next, unscrew the connector of the front headlight and remove the original bulb; repeat the same procedure for the other side. Now, take the LED kit and install it in the original socket, as it is plug & play. Turn on the headlights to check if they work correctly and if the beam needs adjustment. Task complete.

Updated on 28 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Low Beam Bulbs on a Nissan Rogue
How to Replace the Low Beam Bulbs on a Nissan Rogue
Nissan Rogue (2014-2020 / T32) Replacing the low beam bulbs on a Nissan Rogue is a very simple and quick task. First, ensure that the key is not inserted, then open the hood and re…
Where are the fuses located in the Nissan Rogue?
Where are the fuses located in the Nissan Rogue?
Nissan Rogue (2021-2026 / T33) The fuses of the Nissan Rogue are located inside the appropriate fuse boxes that are installed on the car: in this type of vehicle it will be possibl…
How to Replace the Windshield Wiper Blades on a Nissan Rogue?
How to Replace the Windshield Wiper Blades on a Nissan Rogue?
Nissan Rogue (2014-2020 / T32) To replace the windshield wiper blades on a Nissan Rogue, position them vertically so they do not touch the windshield. Then, remove the clip that co…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos