Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Door Panel of the Nissan Qashqai?

Model: Nissan Qashqai J10 - Years 2006-2014
Part: Door trim panel

To remove the door panel of the Nissan Qashqai, first detach the trim above the internal handle. Once the trim is removed, you can unscrew the screws underneath, including the one located in the handle recess. After all these screws are loosened, you can detach the panel, disconnecting all the connectors inside it as well. The old panel can then be replaced with a new spare part, which should be properly connected to the connectors and secured with screws.

Updated on 2 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Nissan Qashqai (2014-2022 / J11) Today’s steps will allow you to dismantle and replace the front door speaker on a Nissan Qashqai. First, open the front door of the vehicle and begin…
Nissan Qashqai (2006-2014 / J10) How to remove the door panel with the window motor on a Nissan Qashqai? Before starting the disassembly, disconnect the battery terminals located in …
Nissan Qashqai (2014-2022 / J11) How do you remove the door panel on a Nissan Qashqai? This video explains the procedure. Before starting the disassembly, disconnect the battery term…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos