Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Navara
    4. : How to replace the pollen filter on Nissan Navara.

Nissan Navara - Video tutorial

Model: Nissan Navara D40 - Years 2005-2015
Part: Cabin air filter
Operation: How to replace the pollen filter on Nissan Navara.

In this video tutorial we can see how it is possible to replace the pollen filter on Nissan Navara, following a few simple steps: the first thing we must do is to buy a new pollen filter from an authorized dealer; next step we have to get in the car and turn off the car and pull the handbrake. The cabin filter on this car can be found inside the car, behind the glove compartment, so we have to remove all the material inside it; press the sides of the drawer and pull it towards us to remove it; at this point we have to unhook the connector and unscrew the screw and remove the filter cover and then remove the two filters. Position the two new filters following the directions of the arrows.


Posted on 30 July 2022 by ScegliAuto



How do i replace the cabin filter on the Nissan Navara?
Nissan Navara (2005-2015 / D40) In order to replace the Nissan Navara cabin filter, you need to open the glove box located on the front passenger side, so that the pins inside it ar
How to remove the taillight of a Nissan Navara
Nissan Navara (2005-2015 / D40) Before we can begin, we will have to go to open the tailgate of the load compartment of our Nissan Navara. So let's start by unscrewing and removing
Where is the OBD port located on the Nissan Navara 2?
Nissan Navara (2005-2015 / D40) If you own a Nissan Navara Mk2 (year 2005-2015) and want to find out where the OBD port is located, all you have to do is follow these steps. First,

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos