Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Nissan Juke.

Model: Nissan Juke MK 1 - Years 2010-2019
Part: Service warning light

In this guide, you will learn how to reset the service light on a Nissan Juke. Turn on the ignition; press both buttons located under the display simultaneously. At this point, you will see the numbers next to the light flashing. Keep the buttons pressed until the number reaches 18,000. Now, by pressing only the right button, you can select when the light will come on again to indicate the need for a check: each press of the button will correspond to an increase of 500 kilometres. Once you reach the desired number, simply turn off the ignition.

Updated on 6 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the Service light on the Nissan Juke?
How to reset the Service light on the Nissan Juke?
Nissan Juke (2010-2019 / MK 1) You can completely clear the Service light displayed on the Nissan Juke's panel by activating the instrument panel, turning the appropriate key: once…
How to Reset the Service Light on a 2013 Nissan Juke?
How to Reset the Service Light on a 2013 Nissan Juke?
Nissan Juke (2010-2019 / MK 1) Learn, with the attached video guide, how to clear the service light on a 2013 Nissan Juke. This procedure can only be performed after completing all…
How to Reset Service Light on 2018 Nissan Juke
How to Reset Service Light on 2018 Nissan Juke
Nissan Juke (2010-2019 / MK 1) Today, you will see how to reset the service light related to the car service on a 2018 Nissan Juke. To start the reset procedure, turn on the igniti…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos