Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Spark Plugs of the Nissan Rogue 1

Model: Nissan Rogue S35 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Spark plugs

See other generations:
Video tutorial

In this short and simple guide, let's see how to replace the engine spark plugs of the first generation Nissan Rogue. First, open the hood and disconnect the negative terminal of the battery.

Then, remove the air filter box by disconnecting it from the intake hose. Next, unscrew the screws of the spark plug electrical connectors to remove the boots.

Now, use a socket wrench with an extension to unscrew and remove the spark plugs. Finally, replace them with new ones, hand-tightening first and then tightening with the wrench!


Updated on 7 June 2026 by ScegliAuto


Related tutorials

How to Replace the Spark Plugs on a Nissan Rogue
How to Replace the Spark Plugs on a Nissan Rogue
Nissan Rogue (2014-2020 / T32) This guide will show you how to remove and replace the engine spark plugs on a Nissan Rogue. First, open the hood and disconnect and remove the intak…
How to Replace the Spark Plugs on the Nissan Rogue?
How to Replace the Spark Plugs on the Nissan Rogue?
Nissan Rogue (2014-2020 / T32) To replace the spark plugs on the Nissan Rogue, open the hood to access the components in the lower part of the engine bay by removing the plastic co…
Removing the Door Panel from the Nissan Rogue 1
Removing the Door Panel from the Nissan Rogue 1
Nissan Rogue (2008-2015 / S35) In this video tutorial, see how to remove and replace the front door panel of the first-generation Nissan Rogue by following the instructions below. …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos