Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Tensioner Pulley on a Nissan Rogue?

Model: Nissan X Trail MK 1, T30 - Years: 2001, 2002, 2003, 2004, 2005, 2006
Part: Checks and maintenance

See other generations:
Video tutorial

In this tutorial, see how to replace the tensioner pulley on a Nissan X-Trail. This operation is straightforward if you have good manual skills.

First, ensure the engine is completely cold, then lift the front right wheel area, remove it, and take off the inner wheel arch panel. Next, grip the pulley bolt with the appropriate spanner, turn it to the left, and remove the belt.

Then, unscrew the same bolt, remove the pulley, and disassemble the rest of the mechanism if necessary. Fit the replacement part by following the procedure in reverse.


Updated on 9 June 2026 by ScegliAuto


Related tutorials

Where is the fuse box of the Nissan X Trail T30 located?
Where is the fuse box of the Nissan X Trail T30 located?
Nissan X Trail (2001-2006 / MK 1, T30) In this new guide dedicated to all of you who own a Nissan X Trail T30, we will describe the various steps you need to take to locate the fuse box of…
Replacement of the diesel filter of the Nissan X-Trail 1.6 dCi
Replacement of the diesel filter of the Nissan X-Trail 1.6 dCi
Nissan X Trail (2014-2023 / MK 3, T32) Following these simple steps, we will see how to disassemble and replace the diesel fuel filter of the Nissan X-Trail 1.6 dCi. First of all, we open …
Where to find the relays of a Nissan X-Trail?
Where to find the relays of a Nissan X-Trail?
Nissan X Trail (2001-2006 / MK 1, T30) Today, focus on locating and accessing the relays of your Nissan X-Trail. Start by opening the driver's front door. Next, remove the side carpet. Onc…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos