Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Rogue
    4. : How do i replace the windshield wiper blades on the Nissan Rogue?

Nissan Rogue - Video tutorial

Model: Nissan Rogue T32 - Years 2014-2020
Part: Windscreen wipers
Operation: How do i replace the windshield wiper blades on the Nissan Rogue?

The replacement of the Nissan Rogue wiper blades is carried out by placing the latter in a vertical position, so that they are not in contact with the windscreen: it will therefore be possible to remove the hook that connects the blade to the relative arm and then slide the blade downwards; the same operation can also be carried out for the other brush present. Once both the old brushes have been removed, it will be possible to insert the new ones, hooking them to the relative arms and repositioning them on the windscreen: then they must be activated to verify that they have been installed correctly.


Posted on 14 September 2022 by ScegliAuto



How do you replace the wiper blades on the Nissan Rogue?
Nissan Rogue (2008-2015 / S35) In order to replace the wiper blades on the Nissan Rogue, you need to lift the wiper arms so that the blades are not in contact with the windshield.
How to replace rear wiper on Nissan Rogue [USA]
Nissan Rogue (2014-2020 / T32) To replace the rear wiper (heated rear window wiper) it is necessary to operate with the tailgate closed. At the base of the windshield wiper there i
How to replace Nissan Rogue front wipers
Nissan Rogue (2014-2020 / T32) In this video tutorial we will see how to remove and replace the front wipers of the Nissan Rogue, in simple and quick steps. First of all we get on

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos