Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the License Plate Bulb on a Nissan Rogue?

Model: Nissan Rogue T32 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: License plate light

See other generations:
Video tutorial

To replace the license plate bulb on a Nissan Rogue, use a tool to pry the light assembly above the license plate out of its housing. Once the light assembly is removed, you can take out the old bulb from inside and disconnect it from its connector.

Connect the new bulb to the connector, then insert it back into the light assembly. Finally, snap the assembly back into its housing and check that the license plate light works properly.


Updated on 15 June 2026 by ScegliAuto


Related tutorials

How to replace the license plate light of the Nissan Rogue
How to replace the license plate light of the Nissan Rogue
Nissan Rogue (2014-2020 / T32) If you are experiencing serious malfunctions with the license plate light of your Nissan Rogue, don't worry because with the following procedure you …
How to replace the license plate light bulb on a 2021 Nissan Rogue
How to replace the license plate light bulb on a 2021 Nissan Rogue
Nissan Rogue (2021-2026 / T33) To replace the license plate light bulb of a 2021 Nissan Rogue, we need to use a plastic removal tool, which should be inserted into the headlight to…
How to Replace the License Plate Lights on a Nissan Rogue
How to Replace the License Plate Lights on a Nissan Rogue
Nissan Rogue (2014-2020 / T32) If you need to replace the license plate light on this car model, perhaps installing an LED light, the following description outlines the various ste…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos