Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Qashqai
    4. : How to reset service warning light on 2011 Nissan Qashqai

Nissan Qashqai - Video tutorial

Model: Nissan Qashqai J10 - Years 2006-2014
Part: -board computer
Operation: How to reset service warning light on 2011 Nissan Qashqai

To reset the oil change service command, proceed as follows: open the door and access the driver's seat, turn the key and turn on the ignition. With the button located in the center of the dashboard near the odometer, it is possible to move within the on-board computer menu, rotate the command dial to the "maintenance" menu, press the control again and rotate the dial again to "service" ", press the control again and rotate it until the" reset "item is highlighted. Press the control again and, in this way, the service indication will be reset.


Posted on 24 October 2022 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Qashqai 2014-2022 - What can the Airbag error code on the Nissan Qashqai depend on? Read Answer
    • Qashqai 2014-2022 - What to do when the adblue warning light on the Nissan Qashqai comes on? Read Answer
    • Qashqai 2014-2022 - What are the warning lights (yellow) on a Nissan Qashqai? Read Answer
    • Qashqai 2014-2022 - How does the Nissan Qashqai control system fault warning light indicate? Read Answer
    • Qashqai 2014-2022 - What does the flashing light of the airbag mean in the Nissan Qashqai? Read Answer
    • Qashqai 2014-2022 - What problems with the cruise control of the Nissan Qashqai? Read Answer
    • Qashqai 2014-2022 - What problems can Cruise Control give on a Nissan Quashqai? Read Answer
    • Qashqai 2014-2022 - What does it depend on when the Nissan Qashqai chassis control system fails? Read Answer
    • Qashqai 2014-2022 - What to do when the parking sensors of the Nissan Qashqai do not work? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos