|
Do it yourself
| |||
| ||||
How to Replace the Fog Light on a Nissan Qashqai
Model: Nissan Qashqai
J11
- Years:
2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Video tutorial
For a proper and quick replacement of the fog lights on your Nissan Qashqai, follow these simple steps: Gather a Phillips screwdriver, a flathead screwdriver, and preferably nitrile gloves to avoid oils from your skin affecting the bulb's lifespan. To remove the fog light, ensure the vehicle is off and engage the handbrake. Next, turn the wheel outward on the side where you need to replace the fog light. Using the Phillips screwdriver, unscrew the two screws beneath the bumper, under the faulty headlamp. Once removed, shift your attention to the wheel arch and using the flathead screwdriver, remove the three plastic rivets holding it in place, then pull to extract them. Now you can remove the wheel arch liner and access the fog light's electrical connector, which you need to turn 1/4 turn counterclockwise to remove. Disconnect the bulb from the power cable by pulling on the tab and replace it with the new bulb. Reassemble everything carefully, and you're done.
Updated on 24 June 2026 by ScegliAuto
Related tutorials
Nissan Qashqai
(2014-2022 /
J11)
.. In this guide, you will learn how to replace the fog light on a Nissan Qashqai. First, remove the plastic cover from the bumper where.. …
Nissan Qashqai
(2014-2022 /
J11)
The fog light bulbs of the Nissan Qashqai are not accessible without first removing the front wheel arch liner. Remove it as shown in the video using…
Nissan Qashqai
(2014-2022 /
J11)
In a few simple steps, learn how to replace the front fog light bulbs on the Nissan Qashqai. First, move to the front of the vehicle and remove all t…
Other guides you may be interested in
|
How to Reset the Tire Pressure Light on a MG ZS?
On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.063
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |